Wire Cutting Cum Stripping Machine: CTSS 32-33
M/s ‘machine makers r.s.’ Have developed and manufactured a range of ‘Automatic Wire Cutting cum Insulation stripping machines’.
Each one of them is an accurate and efficient machine to cut PVC coated electric wires and also to remove the insulation from both ends. That is to cut and strip wires from a bundle of wire, so as to make them ready for wiring and harnessing.
These machines are user-friendly, tabletop, fully automatic machines. They are incorporating the state of the art technology and are economic alternative to costly imported machines.
These machines can cut and strip single core, multi-strand PVC insulated electric wires. Partial as well as Full stripping is possible.
A production rate of around 2500 wire pieces per hour can be achieved (Refer table on the next page). Smaller wires can be fed two at a time to get almost double productivity.
These machines are manufactured with high quality, robust, imported stepper motors.
Machines are supplied with V blades for cutting and stripping a range of wires.
Machines require single-phase 220 V AC stable electric supply and a compressed air supply at 4-bar pressure.
Wires from 0.5 sq mm to 6 sq mm can be processed on model CTSS 32.
Machine model CTSS 33 is suitable for wires from 0.5 sq mm to 2.5 sq mm.
For wires/battery cables from 8 sq mm to 25 sq mm, model CTSS 303 can be used.
Special machines for specific customer needs can also be developed by m/s ‘machine makers r.s.’.
WIRE CUTTING AND STRIPPING MACHINES
Wire cutting and stripping machines: Model-CTSS 32 / CTSS33
· “MICROPROCESSOR controlled machines with smart display.
· Fully automatic machine. Setting is completely digitized and mostly automatic.
· Machines for both side stripping. (Can also do single side stripping and also only cutting).
Performance Range
|
Wire Cross section
|
Model CTSS 32 : 0.5 to 6 mm2
Model CTSS 33 : 0.5 to 2.5 mm2
(Contact us for sizes outside this range)
|
|
Length Selection
|
Standard range: 50 mm to 9 meters, in steps of 1mm;
Range can be extended to get 20mm to 25 meters
|
|
Accuracy
|
+/- 0.2% (min. +/-1.5 mm)
|
|
End Stripping
|
Upto 35 mm at both ends (subject to material friction)
Partial as well as Complete stripping possible
|
|
Middle Stripping
|
Upto 2 windows max. (Conditions apply, In select models only)
|
|
Multiple Wire Processing
|
· CTSS 32 can process 2 wires at a time for Wires upto 1.5 Sq.mm. with the help of accessories. For higher sizes, machine will process 1 wire at a time
· CTSS 33 can process 2 wires at a time for Wires upto 1.0 Sq.mm. For higher sizes, machine will process 1 wire at a time.
|
|
Wire Types
|
Single core with single or multiple strands / Flexible or rigid
|
|
Max. Outside Diameter
|
6 mm
|
|
Changeover setting time
|
30 sec typically.
|
Technical Data
|
Mechanical system
|
Rugged machine with precision mechanical system
|
|
Electronic system
|
Separate control panel with PLC and drives
|
|
Wire feed system
|
2 stepping motors with 4 feed rollers, variable speed
|
|
Cutting & Stripping system
|
V blade pair with stepping motor, variable speed and PLC controlled strokes
|
|
Length Measurement system
|
Directly by stepping motor control
|
|
Power
|
220V / 50 Hz, other options upon request
|
|
Compressed air
|
5 to 7 bar, 70 to100 psi, 40 lpm (less than 0.5 hp)
|
|
Dimensions
|
Main Unit : 400mm X 400mm X 275mm(h)
Control Panel : 585 mm X 275mm X 465 mm (h)
Control Panel is normally kept below work table
|
Production Speed*§:.
|
Style
|
100mm
|
500mm
|
|
Only Cutting
|
8000/hr. (15000/hr)
|
6000/hr (11000/hr)
|
|
Cutting and single Side stripping
|
4500/hr (8500/hr)
|
4000/hr (7000/hr
|
|
Cutting and both Side stripping
|
2800/hr (5000/hr)
|
2300/hr (4000/hr)
|
* Speed for 0.5 sq mm multi-strand wires § Speeds mentioned in bracket are with two wires at a time.
Voltage servo-stabilizer (2KVA) or CVT (1KVA) is must. Proper earthing is essential.
|
