Cutting & Stripping machine for Battery Cables

M/s ‘machine makers r.s.’ have developed and manufactured Cutting and Stripping machine (Model RAE-Ser 21) for Battery Cables. The machine is suitable for cables upto 50 sq mm cross-section. It cuts the cable to accurate length and also removes insulation from both ends. CTSS 303 uses a specially developed belt feeding system. It takes care of heavy frictional forces required for stripping thick cables.

This machine is tabletop, user-friendly, and automatic. It uses different sets of blades for various sizes of cables. All other setting is completely digital. .

It is available with Microprocessor controls as well as PC based Controls.  A simple and smart keypad and display is used for setting the length, target quantity, batch qty etc. It comes with in-built production counter, which indicates the number of cuts taken.

The Rae-Ser21 machines can cut cables of length from 125mm to 9meters. It can strip upto 35mm from either side.

Depending upon the length, the machine can process around 1200 wires per hour. The machine works on single phase electric supply and 5 bar pneumatic supply. Special machines for other specific customer needs can also be developed by m/s ‘machine makers r.s.’. Some basic features of the machine will be as follows:

1)       Wire length: 125 mm to 9 mtrs (in steps of 1 mm);

2)       Insulation stripping: 5 to 35 mm (in steps of 0.1 mm);.

3)       Machine will have cutting length tolerances as ±0.3 % (but minimum ±2 mm)

4)       Tolerance on stripping length will be  ±0.5mm

5)       The machine will be able to cut and strip at least 10 wires (of length 2m, strip length 12 mm each) per minute. (That is at least 600 wires per hour, or at least 7200 wires per 12 hours)

The machine will require tension/pull-free wire to get accurate results.